Product Description
-------------------
Micrometer Vise Head, Base Type Portable, Jaw Width 7/8 In.,
Max. Opening 1/2 In., Throat Depth 1-3/8 In., Jaw Face Smooth,
Jaw Material Nylon, Material Aluminum, Swivel Angle 360 Degrees ,
Overall Length 3/4 In., Overall Width 2-13/16 In., Overall Height
3-11/16 In., Features Single Knob Controls Head Movement Through
3 Planes, 210 deg. Tilt, 360 deg. Turn and 360 deg. Rotation,
Compatible with all 300 Series Bases
From the Manufacturer
---------------------
The PanaVise 385 micrometer head is a specialized work-holding
accessory designed to securely and safely hold micrometers. It is
3-1/8" (79.8 mm) tall and weighs 0.23 lb. (0.1 kg). The head has
a 5/8" (15.9 mm) shaft which is compatible with any PanaVise 300
series base. The upper end of the head has a side twist jaw lined
with two thermoplastic Delrin pads. The jaws of the 385
micrometer head open from 0 - 1/2" (12.7 mm) with the high
stiffness and low friction of the Delrin pads aiding in the
accuracy of readings. The 385 micrometer head has a 15/16" (24.1
mm) throat depth. This allows the head to effectively clamp the
frame of an inserted micrometer into place, freeing one of the
user's hands to hold the edge of the item being measured, while
the other turns the micrometer's dials. The 385 micrometer head
can also be used to hold circuit boards and other small items.
Micrometers are handheld devices used to make small, precise
measurements of parts used in machining, manufacturing and other
trades. The common outside micrometer utilizes a calibrated screw
set to the exact width desired and has an exagerated "U" shape
that terminates in a flat frame. This distinctive shape allows
the entire outer surface of parts to be measured by passing them
through the device. Micrometers are sensitive devices whose
accuracy can be compromised by constantly putting the device down
and picking it back up again. ing a micrometer along its
frame eliminates this possibility, and frees up both hands for
manipulation of the parts through the measured opening.
Limited Lifetime Warranty
-------------------------
All PanaVise products are warranted against defective materials
and/or workmanship to all original consumer owners from the date
of original consumer purchase for the lifetime of ownership by
the original consumer owner. In the event of defective materials
and/or workmanship, PanaVise Products, Inc. will, without charge,
repair or replace, at its option, the defective product within
60-days from the receipt of the defective product. The Warranty
does not apply to damage not resulting from defective materials
and/or workmanship while in the possession of the original
consumer or to unreasonable use by the original consumer, which
includes but is not limited to improper installation, or failure
to provide reasonable and necessary maintenance.
About PanaVise
--------------
Founded in 1957 by tool and die maker Otto Colbert and currently
headquartered in Reno, Nevada, PanaVise is a leader in
work-holding products. Over the years, a natural outgrowth of
this expertise has been continued development of other items
which hold things securely and offer a wide range of motion.
Important areas in which this has been applied include,
electronics, CCTV camera s, and audio/video s, earning
PanaVise the nickname the "the hold it anywhere you want it
company."
- Hold a micrometer or small item exactly where YOU want it!.
- Delrin pads open 0.5-Inch (12.7mm) and close to zero for holding thin items.
- Compatible with all 300 series Bases.
- Throat depth: 0.95-Inch (24.1mm), Height (shaft to top of jaws): 3.14 (79.8mm), Weight: 0.23 lbs. (0.1kg).